惠普标识 & 展示媒介
Take on demanding display conditionsFrom long-lasting indoor displays to demanding outdoor display conditions, this durablebanner material can handle it all. Brilliant image quality is preserved in water¹- and tear-resistantprints. Full 100% opacity provides for no show-through on the back side.²
Deliver brilliant image quality, provide flame-resistant printsDeliver brilliant image quality in durable, opaque banners. Water- and tear-resistantdisplays remain vibrant and provide flame resistance with NFPA701 and B1 approved firecertifications.
Gain efficiency while providing an environmentally friendly alternativeSave time and gain efficiency with ICC profiles that help you get the color you need quickly.Differentiate with environmental certifications.
Trade show and event displays
Durable, tear-resistant polyester scrim banner
Print service providers
POP and retail displays
Color brilliance, sharp edge definition
Built-in ‘block out’ layer for no show-through
NFPA701 and B1 approved fire certifications
495 g/m² per ISO 536 Test Method
378 microns/14.9 mil per ISO 534 Test Method
100% per TAPPI T-425 Test Method
98% per TAPPI T-452 Test Method
127 per CIE Ganz 82 Test Method
15 to 35° C / 59 to 95° F
20 to 80% RH
Water-resistant with Original HP 842B PageWide XL Inks and HP Vivid Photo Inks
Cold lamination. Can be laminated with most commercially available cold laminate films.4
1 year at recommended temperature and humidity
10 to 25° C / 50 to 77° F
35 to 65% RH
Country of origin
Product of China
610 mm x 30,5 m (24 in x 100 ft)
914 mm x 30,5 m (36 in x 100 ft)
1016 mm x 30,5 m (40 in x 100 ft)
HP large format printing materials are free from defects in materials and workmanship. For warranty statement please see HPLFMedia.com/go/mediawarranties. To obtain warranty service, please contact Brand Management Group customer support at HPLFMedia.com/hp/en/contactus.
PageWide XL8000, DesignJet Z6100, Z6200, Z6600, Z6800
1 Performance varies based on printer and print profile. Water resistance testing by HP Image Permanence Lab on a range of HP media and follows ISO 18935 method. For more information, see: HPLFMedia.com/hp/printpermanence.
2 100% per TAPPI T-425 Test Method.
3 This product does not contain substances listed as SVHC (155) per Annex XIV of the EU REACH directive published as of June 16, 2014 in concentrations exceeding 0.1%. To determine the status of SVHC in HP products, see the HP REACH Declaration published at HP Printing Products and Consumable Supplies. Logo source: Copyright European Chemicals Agency.
4 Based on testing HP media printed with Original HP inks using a 3-mil vinyl film laminate that contains a water-based acrylic pressure-sensitive adhesive and a 3-mil vinyl film laminate that contains a solvent acrylic pressure- sensitive adhesive—the formulations of which HP believes represent the majority of cold film laminates that are commercially available based on historical testing. Films without the above-mentioned formulations may not be compatible.
© 2018 HP Development Company, L.P.. © 2018 Brand Management Group. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP and BMG shall not be liable for technical or editorial errors or omissions contained herein.
HP is a registered trademark of HP Development Company, L.P. and is used by Brand Management Group on license from HP Development Company, L.P..